Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.310-366S
Maximum HP - Engine 30 HP
Cutting Width – 60”
Overall Width - 63”
Height - 34”
Length - 64”
Weight (Air Tires) - 577lbs.
Cutting Height (1/2” increments) - 3/4” - 5 1/4”
Deck Material Thickness - 3/16”
Blade Tip Speed - 18,195 FPM
Blade Construction -3 ea. - 1/4” x 2 1/2” x 21” Heat Treated Alloy Steel
Blade Options - Standard Blades: Medium Lift, Optional Blades: Low Lift, High Lift & Mulching
Blade Overlap - 1 1/4”
Blade Spindles - 1 3/8” dia., Cast Iron Greasable Hubs
Discharge - Rear
Hitch - Category l
Lower Hitch - Floating
Top Link - Floating
Castered Gauge Wheels - 3 1/4” x 10” Solid Rubber
Caster Wheel Spindle - 1” Diameter with Nylon Bushing
Drive Train - 540 RPM PTO, Cast Iron Housing Gearbox With Beveled Gears, 1:2.83 Ratio, Spring Loaded Single V-Belt
Driveline - Heavy-Duty w/quick coupler, ASAE Cat 2
Front Roller - Optional
Quick Hitch Adaptable -Yes
Features and Benefits
Designs, specifications, features and information are subject to change without notice.
Gearbox HP rating - 15 - 30 HP to cover a wide array of tractors.
Rear discharge - The wide, even dispersal of grass leaves a fine thin layer directly behind the mower, vs. a possible windrow to the side. Keeps grass from blowing in unwanted areas. Easier to mow around objects.
Deflectors - Built-in to throw material down, as well as forcing thrown objects down.
Clevis type lower hitch points - Allows for easy hook-up by being able to remove pins and back into clevises.
Floating 3-point - Top and bottom hitch points float up and down which allows the mower to float over uneven terrain.
Roll formed front on leading edge of deck. - 3/16" roll formed front deck edging for greater strength and impact resistance.
Frame-over-deck design - Frames takes stress out of deck by supporting it.
3/16” Deck thickness - Heavy deck material to aid in overall strength and longevity. Reinforced spindle mounts.
Lower hitch points adjust in and out - Accommodates many tractor configurations by adjusting in and out.
Hard rubber tires - Hard rubber tires are sandwiched between the rim halves, bolted in and can’t go flat. Roller bearings allow for a long life.
Choices of Blades - Low, medium, high-lift, or mulching blades are available to match customer needs and specific applications.
Blade overlap - 1" blade overlap assures no skipping in tight turns.
High Blade Tip Speed - 60" = 18,195 fpm For cleaner cutting and better dispersion of clippings.
Heavy-duty roller bearings
& 1 3/8" machined spindles
Roller bearings for smooth running and quiet operation, 1 3/8" machined spindles for
durability, balanced performance, and accuracy. Cast iron housings for added protection and
Top greasing spindles Assures top bearing gets grease. No shields to remove.
Single B-section Kevlar belt Simple one belt design. Kevlar material adds additional strength.
Vacuum formed ABS belt guards - No scratching, no rattling.
Non-aligned gauge wheels - Rear wheels don’t track behind the front wheels to reduce laying grass over.
Spring loaded adjustable idler - Allows for constant and proper tension on belt. Better than adjusting gearbox for belt tension.
Quick Hitch Compatible - Compatible with Land Pride Quick Hitch for easy attachment and removal increasesproductivity. (Except 48”)
Top Hitch - Top hitch has two hook-up points which allows greater lifting leverage for smaller tractors.
Driveline hanger - For ease in hookup and storeage of driveline. Keeps driveline off ground.
For any questions about this or any of our other products please