The Tractor company
Home PageTractorsImplementsTrailersPackagesF.A.Q.About Us
Mahindra     :     Talon     :     Tytan     :     Reconditioned     :     American Made Tractors
1815 HST     :     2516 HST     :     2816 HST     :     3215 HST     :     About Mahindra     :     Mahindra Warranty
2516 HST
Mahindra 2516 HST



PULL MORE, LIFT MORE, DO MORE!
2415 HST

YOU CAN COUNT ON MAHINDRA! 

view gallery

view loader specs 
Standard Features (that means no extra cost to you)
•  3-year limited warranty (3-year engine and power train warranty - see dealer for details) •  Choice of Ag, Industrial or Turf tires at no extra cost •  Clear view, multifunctional instrument panel
•  Comfortable mounting step and easy grip handle on either side of tractor •  Comfortable, adjustable driver seat with water drain facility •  Drawbar
•  Easy access hydraulic block to enable external hydraulic connections •  Easy forward tilt possible on seat for tractor storage •  Easy hook for top link retention
•  Easy latch for clutch pedal locking during tractor storage •  Enclosed down-swept exhaust muffler •  Ergonomic controls and pedals for operator comfort
•  Foldable ROPS •  Front bumper / weight bracket •  Hitch lowering speed adjustment knob
•  Hood opens completely for ease of access •  Tilt steering column
   Specifications
   ENGINE
Type  
   Four stroke, indirect injection, water-cooled, diesel
Cylinders  
   3
Engine HP (kW) @ rpm  
   25 (17.9) @ 2500
Compression Ratio  
   22:1
Displacement cubic inch (cc)   
   80.4 (1318)
   ELECTRICAL
Battery Capacity  
   12 volt, 35 amp hours
Alternator  
   12 volt, 50 amps
   CLUTCH
Type  
   Single plate, dry
   TRANSMISSION
Type  
   HST - 2 ranges
Number of Speeds   
   Infinite
   FRONT WHEEL DRIVE
Type  
   Mechanical
   STEERING
Type  
   Hydrostatic power
Pump Output (gallons per minute)  
   2.7
   BRAKES
Type  
   Wet disc
   HYDRAULIC SYSTEM
Type  
   Open center, full-live hydraulic with position control
Pump Output (gallons per minute)  
   5.8
3-Point Linkage  
   Category 1, with check chains
Lift Capacity (lbs.)  
   2205
Rear Auxiliary Remote Valves   
   1 spool optional
   PTO
Type  
   Live
PTO RPM (engine rpm)  
   540 @ 2376
MID PTO RPM (engine rpm)   
   2000 @ 2526 (optional)
PTO HP (kW)  
   20 (14.9)
   OPERATING WEIGHT
Total (lbs.)  
   1863
   DIMENSIONS WITH INDUSTRIAL TIRES
Overall Length Inches (mm)  
   109.3 (2775)
Overall Width Inches (mm)  
   54.3 (1380)
Turning Radius Min. Feet (mts)  
   7.9 (2.4)
   TIRES (SIZES AND OPTIONS)
Ag (Front / Rear)  
   7x12 / 9.5x16
Industrial (Front / Rear)  
   23x8.5-12 / 12x16.5
Turf (Front / Rear)  
   23x8.5-12 / 33x12.5-16.5
TOP     BACK 

ML105 Loader Specifications
    SPECS
Maximum Lift Height  
   83"
Clearance with Attachment Dumped  
   64.5"
Reach at Maximum Height  
   30.5"
Maximum Dump Angle  
   40°
Attachment Rollback Angle  
   20°
Digging Depth Below Grade  
   4"
Lift Capacity to Full Height @ Pivot Pins  
   1050 lbs.
Breakout Force @ Pivot Pins  
   2000 lbs.
Rated Flow (Tractor System)  
   5.8 gpm
Attachment width used for specification  
   48"
Attachment rated capacity used for specification  
   7.0 cu. ft.
Cycle Times @ rpm  
   2670 rpm
Raise Boom (seconds)  
   3.3
Lower Boom (seconds)  
   2.4
Dump Attachment (seconds)  
   2.2
Retract Attachment (seconds)  
   2.6


Please note that prices can change daily due to the fluctuating dollar. Please contact us for current prices.




The Tractor Company of North America Inc.
All rights reserved, Copyright ©